湛新树脂Setalux D A 450 BA/X
Setalux D A 450 BA/X
Setalux D A 450 BA/X
Type Polyisocyanate cross-linking Acrylic Resin
Characterization Hydroxyl Content: approx. 2% on solid resin
Form supplied approx. 50 % in butyl acetate/xylene, 1 : 1
Uses As the polyol component in the formulation of
fast-drying two-component polyurethane coatings
Specification
Property Value Unit of measurement Method
Hazen color value ≤ 50 DIN EN 1557
Acid value 4 ± 2 mg KOH/g DIN EN ISO 2114
Viscosity at 23 °C 4500 ± 1000 mPa·s DIN EN ISO 3219/A.3
Non-volatile content 50 ± 2 % DIN EN ISO 3251
(1 g resin/1 ml TKP*/1 h 105 °C)
Disflamoll® TKP (tricresyl phosphate)
Hydroxyl content, supply form 0.8 to 1.2 % DIN 53 240/2
Water content ≤ 0.1 % DIN 51 777/1
Other data*
Property Value Unit of measurement Method
Equivalent weight approx. 1700
Density at 20 °C approx. 1.01 g/ml DIN EN ISO 2811-2
Flash point approx. 23 °C DIN EN ISO 1523
Hydroxyl content, solid resin approx. 2 %
*These values provide general information and are not part of the product specification
Setalux D A 450 BA/X
Solubility / thinnability Setalux D A 450 BA/X can be thinned to a solids
content of 20 % using esters, ketones and ether
esters. However, the solutions formed must be
tested for their storage stability. Toluene and
xylene are suitable as diluents.Only PU grade
solvents should be used (< 0.05 % water).
They should contain no other reactive impurities
Compatibility Generally speaking, Setalux D A 450 BA/X is
miscible with the Desmodur®grades listed. However,
the combinations must be tested for their
compatibility. Setalux D A 450 BA/X can be mixed
with Desmodur® HL*, IL, L, N 75, N 3390and Z 4470
It is also compatible with certain nitrocellulose
chips, various vinyl copolymers and other Setalux
D A grades. Setalux D A 450 BA/X has only limited
compatibility with Setal grades.
*With increasing age of the polyisocyanate,
incompatibility may develop between
Setalux D A 450 BA/X and Desmodur HL.
Properties / Applications Setalux D A 450 BA/X is suitable for combination
with Desmodur® N 75 or to formulate fast-drying
two-component polyurethane coatings, e.g. for the
industrial furniture finishing. It can also be
combined with other Setalux D A grades to
formulate primer surfacers and fast-drying
automotive and industrial coatings.
With Desmodur HL as the co-reactant,
Setalux D A 450 BA/X yields extremely
fast-drying coatings which are soon dry enough
to sand and stack.
Storage When stored in sealed containers at temperatures
not exceeding 30 °C, the product will remain stable
for 12 months.
Labeling and REACH applications This product data sheet is only valid in
conjunction with the latest edition of the
corresponding Safety Data Sheet. Any updating
of safety-relevant information
– in accordance with statutory requirements
– will only be reflected in the Safety
Data Sheet, copies of which will be revised
and distributed. Information relating to the
current classification and labeling,
applications and processing methods and further
data relevant to safety can be found in the
currently valid Safety Data Sheet.
