资料下载
Bayhydrol AH XP 2754

Characteristic data*
Property              Value           Unit of measurement         Method
Non-volatile content
(1g / 1h / 125 °C, convection oven)
                         approx. 40               %              DIN EN ISO 3251
Viscosity at 23 °C      approx. 20            mPa·s         DIN EN ISO 3219/A.3
pH                       approx. 7,0                                  DIN 53785
*These values are provisional. Binding supply specifications will not be availble
until the final product data sheet is published.
Other data**
Property                           Value          Unit of measurement     Method
Particle size                      approx. 110         nm
Minimum film forming temperature   approx. 85          °C           DIN ISO 2115
**These values provide general information.
Bayhydrol AH XP 2754

Properties / Applications Bayhydrol® AH XP 2754 is a primary styrene acrylic
                           dispersion to formulate one-component clear and
                           pigmented lacquers for single layer coatings and
                           topcoats. Coatings based on Bayhydrol® AH XP 2754
                           show excellent chemical resistance and very high
                           film hardness.
                           Bayhydrol® AH XP 2754 can be combined with polyurethane
                           dispersions or other acrylic dispersions, after checking
                          the specific product compatibility. Bayhydrol® AH XP 2754
                          is especially recommended for plastic coating application.

Storage                • Storage in original sealed Bayer MaterialScience container.
                       • Recommended storage temperature: 5 - 30 °C.
                       • Protect from moisture, heat and foreign material.
                         General information:
                         The product is sensitive to moisture. Storage at higher
                         temperatures will result in increase of color
                         and viscosity.
                         Storage at significantly lower temperatures will result in
                         solidification. This solidification is reversible by
                         briefly heating the product without adversely affecting
                         the quality of the product.

Storage time             Bayer MaterialScience represents that, for a period of
                         six months following the day of shipment as stated in the
                         respective transport documents, the product will meet the
                         values set forth in section "characteristic data" above,
                         provided that the product is stored in full compliance
                         with the storage conditions set forth in and referenced
                         under section "storage" above and is otherwise handled
                         appropriately.
                         The lapse of the six months period does not necessarily
                         mean that the product no longer meets the set values.
                         However, prior to using said product,
                         Bayer MaterialScience recommends to test such a product
                         if it still meets the set values.
                         Bayer MaterialScience does not make any representation
                         regarding the product after the lapse of the six months
                         period and Bayer MaterialScience shall not be responsible
                         or liable in any way for the product failing to meet the
                         set values after the lapse of the six months period